29
Connecting Your Monster THX Select Certified Tower Bass Modules 200
The Tower Bass Module 200 can act as either a woofer for a full-range tower speaker (when paired with a Monitor
100 or 200), or as a standalone subwoofer.
If your Bass Module 200 is intended to be used as part of a full-range speaker connection with a Monitor 100 or 200,
please refer to page 31 for output matching instructions.
If your Tower Bass Module 200 is intended to be used as a standalone subwoofer, you may connect it one of two
ways: via “line level” or “speaker-level” inputs. Line level input is the preferred way for the best possible bass
performance. Please refer to “Using Line Level Connections” or “Using Speaker Level Connections” on page 28
for instructions.
Installing Speaker Grilles
Your Monster THX Select Certified Speakers come standard with removable grilles that require installation before
operation. These grilles conceal speaker components and cables from view for an aesthetic, organized arrangement.
Front Grille Installation
For Dipole Surround Speaker 100 and Subwoofer 200
1. Remove the front grille from plastic packing
and place on a soft, flat surface.
2. Install the grille onto the speaker by inserting the
attached plastic pegs into the pre-drilled peg holes
on the front of the speaker and snapping into place.
For Monitor Speaker 100, Monitor Speaker 200, Tower Speaker 200
and Tower Bass Module 200
1. Remove the front grille from plastic packing
and place on a soft, flat surface.
2. Remove the protective foam packing from
the 6 metal pegs on the front grille.
3. Install the grille onto the speaker by inserting
the attached metal pegs into the pre-drilled peg holes
on the front of the speaker and snapping into place.
Rear Grille Installation
For Monitor Speaker 100, Monitor Speaker 200, Tower Speaker 200
and Tower Bass Module 200
1. Remove the rear grille from plastic packing and place on a soft, flat surface.
2. Connect any necessary cables between your home theater system and your speaker.
3. Install the grille onto the speaker by inserting the attached plastic pegs into the pre-drilled peg holes
on the back of the speaker and snapping into place.
SPEAKER CONNECTIONS
a
c
b
d
Remove Protective Foam
Packing (a-d)
Summary of Contents for THX Select SL-STAND 100
Page 1: ......
