26
MONSTER
®
THX
™
SELECT
™
CERTIFIED SPEAKER SYSTEMS CAN BE CONNECTED IN A VARIETY OF WAYS. WHILE
MOST OF THE CONNECTIONS ARE STRAIGHTFORWARD, SEVERAL VARIATIONS ARE A BIT MORE CHALLENGING.
PLEASE READ THIS ENTIRE SECTION FIRST BEFORE CONNECTING YOUR SPEAKERS.
Before You Begin:
• Turn off all of the audio components in your system.
• Read through your audio components owner’s manuals to confirm their connection and setup procedures.
• When making connections, follow all polarity markings to ensure proper operation of each speaker:
Positive (+) to Positive (usually Red), and Negative (–) to Negative (usually Black).
• If you bi-wire your speakers, remove the jumper straps connecting the terminals. Failure to do so can result
in damaged speakers and components.
• Have the cables available for the type of connections you have chosen.
Connecting Your Tower, Monitor and Dipole Surround Speakers
Your speakers can be connected in a variety of ways. You may chose the standard speaker connection, the bi-wire
speaker connection, or you may connect your Monitor 100 or 200 speakers to your Bass Module 200 using
the conductive spikes. The following instructions and illustrations will guide you through each connection type.
Single Cable Connection
Connect the positive and negative terminals to the correct terminal on the amplifier. Leave the jumper straps in place
between the terminals.
SPEAKER CONNECTIONS
SPEAKER CONNECTIONS
Summary of Contents for THX Select SL-STAND 100
Page 1: ......
