IR Remote
Operation
1
2
Turn on the LED Light Bar by pushing the ON button
on the remote control
3
Set the desired brightness using the buttons to
increase/decrease the intensity of color
Select the desired color of the desired effect by pushing
the corresponding button on the remote control
4
Push the OFF button to turn off the LED Light
1
2
The battery compartment is located on the narrow side
of the remote control
3
Place the battery compartment back in the remote control
so it locks in place
Remove the empty battery and insert a 3V battery,
type CR2025, with the positive terminal pointing upwards
Changing the remote control battery:
Note: The battery for the remote control has already been
installed. Remove the battery pull tab to operate.