5
Remove the tab from the battery compartment of the
remote control
6
Connect the USB cable to a powered USB port or
wall charger (1A adapter required – not included)
3
For horizontal or wall mounted orientations, attach the base
in the center of the light bar using the two included screws.
For vertical orientation, route cord through the cord channel
and attach the base at the end of the light bar.
4
Position the IR receiver in a location where it can receive
signal from the IR remote. Secure the receiver using the
included adhesive tape if desired.
screws
horizontal or
wall mounted:
to avoid cord damage,
don’t pull the cord tight
vertical:
using the cord channel
makes the vertical
light bar more stable
adhesive
this
side
UP
wall mounted tip:
attach the base to the wall
first using the adhesive tape
or, if desired, a screw and
anchor (not included)