Monster ICRUZE INTERFACE CABLE MPC FX IM-MB1, Installation & User Manual

Page: 15 / 24

Step 5
The Interface Module fibers should
now be connected to the factory fibers.
Each end of the fiber now has a black
connector that needs to be connected
to the iCruze MB1 Interface Module.
The fiber connectors are labeled
RX and TX. Looking at the Interface
Module, the RX fiber plugs into the
left port and the TX connector goes
into the right port.
Step 6
There should also be a 3 wire
connector at the factory CD changer
location. With a multimeter, verify
the power and ground wires. They
are typically red for power and black
or brown for ground. Connect
the power wire to the red wire
and ground to the black wire
on the iCruze MB2 Interface Module.
The remaining factory wire (which
is typically blue) connects
to the blue wire on the iCruze
MB1 Interface Module.
Step 6
Step 5
RX
Factory Plug
Connect Red wire to 12 volts
Black wire to ground
Blue wire to remaining wire
TX
MB1
MODULE
Connector