13
Attaching your Flatscreen TV
to the TV Mounting Brackets
1
Center upper bracket horizontally to match
holes on the back of your TV using supplied
screws and optional rectangular washers.
2
Center lower bracket horizontally to match
holes on the back of your TV using supplied
screws and optional rectangular washers.
Refer to illustration on Page 4 to identify
upper and lower brackets.
Your mounting system features 12 sets of screws
of varying diameter and length. Before attaching
the TV mounting plate to your display, determine
which screw set is correct for your display.
DO NOT lay your TV face down when
attaching the TV mounting brackets.
This can cause permanent damage
to your screen. Lean it against a wall
or other solid surface so it remains
vertically upright.
DO NOT over tighten screws. Thread
screws carefully by hand before
tightening. If you feel any resistance,
remove the screw immediately.
The television should be unplugged
before threading any bolt or screw into
the back panel.
3
By hand, thread the screws through the
rectangular washers and brackets’ mounting
holes into the four TV inserts.
4
With a Phillips screwdriver, tighten down the
screws so the upper and lower brackets are
securely attached to the TV.
