monster tower MT1 Installation Instructions And Owner'S Manual Download Page 1

Page: 1 / 12

Reference 09Aug2014 – V16

1 of 12

Installation Instructions

And Owners Manual

MT1

Monster Tower, Inc.

5714 US Hwy 411 S

Maryville, TN 37801

Phone: 877-77-Tower or 865-934-1290

Fax: 877-232-6538 or 770-234-3833

www.MonsterTower.com

[email protected]

Reference 9August2014 – V16

It is critical to lightly lubricate bolt threads with included Anti-Seize

before installing Nylock Nuts to prevent the precision stainless steel

hardware from galling and locking, even if you are test-fitting parts together

before installation.

Leave Legs and Top Section protected with bubble wrap sleeves, removing

only the ends as needed, to protect the boat and tower during installation.

THANK YOU FOR YOUR BUSINESS. IF YOU ARE NOT COMPLETELY SATISFIED

IN ANY WAY WITH YOUR NEW MONSTER TOWER, PLEASE CONTACT US

IMMEDIATELY. Our entire purpose as a company is to create great products at

affordable prices that our customers love.

IMPORTANT

Please take a few minutes to read the installation instructions and become

familiar with the Monster Tower parts and installation before beginning to ensure

a high quality, trouble free installation. If you have any questions during your

installation give us a call at 877-77-Tower or e-mail [email protected]

Summary of Contents for MT1













Search results

Summary of Contents for MT1

Reviews:

Related manuals for MT1

Brands by name

Popular brands

monster tower MT1, Installation Instructions And Owner'S Manual

Search results

Summary of Contents for MT1

Reviews:

Related manuals for MT1

Brands by name

Popular brands