MTLB-V1-051506
Page
1 of 5
Copyright 2002-2006, Monster Tower, Inc
Monster Tower Light Bar
Installation Instructions
and Owners Manual
NOTES ON INSTALLING AND USING YOUR NEW TOWER LIGHTS
Tower lights will reach a high temperature when operating. Do not touch or wash the
lights for 10 minutes after use.
Only use “H3 55W 12V” Halogen light bulb and fuse for replacement. These are available
at most auto parts stores. Anything exceeding 55W/15Amp could
result in damage to
your boat wiring.
Use appropriate gauge wire for all connections. Consult wiring diagrams & wire sizing
chart for details.
Use of a relay is highly recommended unless you confirm your switch can support a 20
amp load. An inline fuse is required (see wiring diagram)
Tower lights are not for wakeboarding at night, which is illegal in every state.
There are countless methods of wiring lights. Please contact a marine wiring specialist if
you need assistance. We have provided the most complete information we have found
within this document.
It is highly recommended that you use a relay and a fuse with each set of lights.
Summary of Contents for Light Bar
Page 10: ......
