855-833-6483 OR EMAIL US AT [email protected]
13
Basic Operation & Riding
This section of the manual gives basic information on how to begin riding your go-kart. In this
section we will cover how to start and stop the engine, how to use the gas and brake pedal or steps
you need to take when you are finished riding.
To protect your new engine and enjoy optimum performance and service life, be sure you break-in
your go-kart properly. To do this, avoid full throttle starts and rapid acceleration for the first 1-2 hours
of riding.
Before riding this go-kart, be sure you have read this entire manual up to this point including the
section titled Important Safety Information & Before Riding.
Even if you have ridden other go-karts in the past, take time to get familiar with the way the
Monster Moto go-kart works and handles. Always practice in a safe area until you have built your skill
level to a point at which you can safely ride the go-kart.
For your safety, avoid starting or operating the go-kart in an enclosed area with
poor ventilation, such as a garage. The go-kart’s exhaust gas contains poisonous carbon monoxide
which can collect rapidly in an enclosed area and result in illness or death.
Your go-kart is not equipped with lights. Do not ride at night.
Starting & Stopping the Engine
Always follow the proper starting procedure as described below.
Check the engine stop switch and switch to “RUN” if needed (1).
Turn the fuel valve to the “ON” position (2).
To restart a warm engine, follow the procedure for high air temperature.
Safe Riding Precautions
Preparation
Starting Procedure
Normal Air Temperature 50 - 95 F (10 - 35 C)
1. Move the choke lever to the right, toward the pull start.
2. Firmly grip the pull start handle and pull.
WARNING
!
WARNING
!
(1)
(2)
