Engine Oil Recommendation (Cont.)
Checking and Adding Oil
0
20
40
60
80
100
-20
-10
0
10
20
30
40
SAE 20W-50
SAE 20W-40
SAE 10W-40
F
C
Oil Fill Cap/Dipstick
(1)
(2)
Basic Maintenance Procedures
Maintaining Your Dirtbike 20
SAE 10W-30
Other viscosities shown in the chart below can be used when the average temperature in your
riding area are within the indicated range.
1. Park the motorcycle on a firm level surface.
2. Clean around the oil fill cap and any nearby surfaces.
3. Unscrew the oil fill cap and wipe it clean.
4. Hold the motorcycle upright so that it is not resting on
the sidestand.
5. Insert the oil fill cap back into the engine until it seats,
but do not screw it in.
6. Remove the oil fill cap and check the oil level. If the oil
level is at or near the upper mark (1), you do need to
add oil. If the oil level is below or near the lower level
mark (2), add the recommended oil until it reaches
the upper level mark (1). Do not overfill.
7. Insert the oil fill cap and screw it in tightly.
8. Start the engine and check for oil leaks.
855-833-6483 OR EMAIL US AT
