English
27
How to remove carbon filter:
1. Remove aluminum filters.
2. Turn the carbon filter to the left and pull it.
3. Replace the old carbon filter with the new one.
4. Put the filter back into place.
If necessary, clean the outside of the air cleaner with a soft, damp cloth. Do not use
any abrasive cleaning agents. For painted stainless steel surfaces: to avoid scratching it is
recommended to wipe them with a soft, damp cloth in the painting direction. Do not remove the
lamp cover during the surface cleaning process.
Caution! Do not use the steam generators for cleaning.
Caution! Not following the above rules for cleaning the appliance and replacing filters may
cause fire.
Caution! If you need to transport the air cleaner, first of all, disconnect it from the power
supply and proceed with disassembly. It is recommended that you transport it in the original
packaging. If this packaging is not available, package the appliance using materials that
prevent possible damage resulting from transportation.
Replacing lamps
Before replacing lamps, remove the hood’s power cable. Lift
the front glass up and remove the aluminum cartridge filter.
Then:
- Disconnect the socket and lamp connector by pulling
back on the plastic tab as shown in the figure on the left to
open the locking device.
- Hold the lamp by the body and turn the 2 fixing tabs on
the lamp clockwise or counterclockwise to fit into the gaps on
the lighting panel. After the fixing tabs line up with the gaps,
hold the lamp by the body and remove it.