9
INSTALLING THE STAND
Unless you will be using a wall or desk mount, you will need to install the stand before you
can use the monitor. Perform the following steps to install the stand.
1.
Using two of the included Stand Screws, attach the two Stand Legs to the Stand
Base, as shown in the images below.
2.
Place the box that the monitor came in on a flat surface, then spread a towel or
blanket on top of the box.
3.
Place the monitor face down on the covered box, then attach the Stand Base to the
back of the monitor using the four remaining Stand Screws, as shown in the images
below.
