Menu Operation
To illustrate the methods used to manipulate the menu options, we will take as an
example selecting one of the sixteen programs to execute:
1. Press the MENU button.
2. Use the UP and DOWN buttons to scroll through the menu options until "Pr--" is
displayed.
3. Press ENTER to select the "Pr--" option.
4. Use the UP and DOWN buttons to increment and decrement the "Pr" number
until it displays "Pr13".
5. Press the ENTER button to set the Program value to 13. The light will now
operate in White+Strobe mode.
Master/Slave Operation
Multiple lights can be daisy chained together, with one serving as the master and the
others configured as slaves to perform whatever actions are performed by the master
unit. The master light can be in any mode except DMX mode, while all the slaves must
be set to DMX mode, using the address A001.
Note: If the daisy chain is longer than 60 meters or if it contains 20 or more light fixtures,
a DMX signal amplifier should be used to ensure that all devices get valid instruction
signals.
Note: The last device in any DMX chain must be terminated using a DMX Terminator.
You can make a DMX terminator using a standard XLR male plug by soldering a 120
ohm (1/4 watt) resistor between pins 2 and 3.
5
Summary of Contents for PAR-64
Page 1: ...USER S MANUAL 612720 ...
