17
5.
Momentarily press the Enter Button. The Display will show DRC [2/4] with the
pointer to the left of the THRESHOLD label.
6.
Rotate the Value Knob clockwise or counterclockwise to increase or decrease the
THRESHOLD value from -32dB to -2dB in 1.0dB increments.
7.
Momentarily press the Enter Button. The Display will show DRC [3/4] with the
pointer to the left of the RATIO label.
8.
Rotate the Value Knob clockwise or counterclockwise to increase or decrease the
RATIO value from 1.2:1 to 8.0:1 in 0.1 ratio increments.
9.
Momentarily press the Enter Button. The Display will show DRC [4/4] with the
pointer to the left of the LF OFFSET label.
10.
Rotate the Value Knob clockwise or counterclockwise to adjust the LF OFFSET value
from -12dB to +12dB in 1.0dB increments.
11.
Momentarily press the Enter Button. The Display will show DRC [1/4] with a pointer
to the left of the ENABLE label.
12.
Momentarily press the Menu Button two times to return to the Home Screen.
Alternatively, wait about 30 seconds and the Display will automatically return to the
Home Screen. The Home Screen will display a DRC label, indicating that DRC is
enabled.
Note: Once a value is changed in any of the above steps, it will take effect whether or not
the Enter Button is pressed. There is no Cancel function to abort changes that have been
made.
