Monoprice IC212W, User Manual

Page: 42 / 51

Plug & Play Wireless Day and Night NetworkCamera
42
4.2. Specifications
Models IP Camera
Power DC 5V, 1A
Processors RISC CPU, hardware video processing and compression.
Network interface Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45
Wireless interface
IEEE 802.11g 6 - 54 Mbps
IEEE 802.11b 1 - 11 Mbps
Transmit power: 14.5dBm typically @ 802.11g
17.5dBm typically @ 802.11b
Receiver sensitivity: 54Mbps: Typical -73dBm @ 10% PER
11Mbps: Typical -86dBm @ 10% PER
Modes: Infrastructure and ad-hoc
Antenna gain: 1.8 dBi
Image sensor RGB VGA 1/4 inch CMOS
Automatic exposure control, automatic white balance,
automatic gain control, automatic brightness control.
Light sensitivity 0.2 Lux ( IR LED off )
0 Lux (with 10 meters IR LEDs on)
Automatically turn on the IR LED in low light environment.
Lens 4.5 mm, F1.9, viewing angle: 55.6°, fixed iris.
focus range: 30 cm to infinity
Day & night IR lens
Motor controlled IR-cut filter (ICR).
Buttons
One reset button, to factory default settings
Indicators One LED for internet connection status indication
One LED for Ethernet connection indication
Video compression MPEG-4 Part 2 (ISO/IEC 14496-2) with motion detection,
profiles: Simple Profile, level 0-3
Resolutions 160x120, 320x240, 640x480
Frame rate Up to 30 fps in all resolutions
Video streaming MPEG-4
Separate frame rate/resolution/bandwidth settings for PC
and mobile.
Image settings Resolution: VGA(640x480), QVGA(320x240),
QQVGA(160x120)
Bandwidth: 64k, 128k, 256k, 512k, 768k, 1M, 1.2M, 1.5M