Plug & Play Wireless Day and Night NetworkCamera
20
All the fields on this page must be filled in correctly with the same settings used by
the wireless router or AP.
Figure 3-8: WiFi security enabled page
You can also click the "WiFi test” button to check if the IP CAM can connect to the
wireless network using these settings. After a successful "WiFi test" unplug the
Ethernet cable to enable the wireless connection.
You can click the "WiFi scan” button to scan for all the available access points
nearby.
If you want to use a fixed IP address with a WiFi connection, click the "IP address”
button and enter in your preferred IP address.
After changing settings click the "Save & Apply” button to make the changes take
effect. You do not need to restart the IP CAM for the WiFi to work, just unplug the
Ethernet cable.
The default setting is "Disable WiFi Function”.
Summary of Contents for IC212W
Page 1: ......
Page 21: ...Plug PlayWirelessDayandNightNetworkCamera 21 Figure 3 9 WiFi testing page...
Page 32: ...Plug PlayWirelessDayandNightNetworkCamera 32 Figure 3 16 Schedule management page...
Page 37: ...Plug PlayWirelessDayandNightNetworkCamera 37 Figure 3 21 Firmware upgrade status page...
