Monoprice Delta Pro, User Manual

Page: 7 / 16

7
Cleaning the Build Plate
To prepare the build plate for printing, use rubbing alcohol or
another ammonia-free solvent and a soft, lint-free cloth to remove
any dust and oil from the surface of the glass while it is at room
temperature.
PREPARING TO PRINT
3. Tap the in the center of the circle.
4. Tap or to adjust the height of the nozzle up or down.
5. Adjust the height of the nozzle until it pinches the paper,
checking each time whether the paper can be moved. Once
the paper cannot be moved, return to the main menu and tap
testtt to home the printer.
Loading Filament
1. Place the filament spool
on the holder so that the
working end of the filament
hangs down to the right.
2. Cut the end of the filament
at an angle as illustrated.
3. Gently straighten a
segment about 5 cm
(2”) from the end with
your fingertips to make it
easier to feed the filament
through the sensor and the
extruder.
4. Remove the filament
sensor from its holder and
feed the end of the filament
through the sensor in the
direction as indicated by
the arrow, then into the
tube on the right side of the
extruder.
5. Pinch the extruder idler
lever and push the filament
past the gear and into the
bowden tube just past the
pneumatic connector.