8
Rear Panel
1.
VIDEO INPUTS: Three HDMI® and one DisplayPort® video inputs. The HDMI 1 input
supports the Mobile High-Definition Link (MHL®) format for displaying video from a
connected mobile device.
2.
HDMI OUT: HDMI connector for connecting the HDMI display.
3.
OPTICAL: Digital optical S/PDIF connector for connecting an external amplifier for
playback of digital optical S/PDIF audio extracted from the output.
4.
L R: 5-pin terminal connector for connecting an external amplifier for playback of
balanced stereo analog audio extracted from the output.
5.
EDID: 4-pin DIP switch for setting the EDID®.
6.
IR IN: 3.5mm jack for connecting the included IR receiver to accept signals from the
included IR remote control.
7.
RS232: 3-pin terminal block for connecting the included RS-232 cable for computer
control of the switch using the supported RS-232 commands. See the
RS-232
COMMANDS section for a list of valid RS-232 commands.
8.
TCP/IP: RJ45 jack for connecting the switch to an existing Ethernet network using
an Ethernet cable (not included) for computer control using the built-in Web GUI.
9.
DC 12V: DC barrel connector for connecting the included AC power adapter.
