10
chain must have a DMX terminator connected to the DMX Out connector.
Note that you cannot use a DMX controller when connecting multiple
lights in Master/Slave mode.
DMX CONTROL
When the light is set to a DMX address it will respond to signals from a
DMX controller. The number and complexity of the signals it can respond to
correspond directly to the number of channels selected. The following
tables show the functions and values for each channel in the four different
channel modes (3, 6, 7, and 8).
3CH MODE
CH VALUES
FUNCTION
PRIORITY
REMARKS
1
000 - 255 Red dimming 0-100%
2
000 - 255 Green dimming 0-100%
3
000 - 255 Blue dimming 0-100%
6CH MODE
CH VALUES
FUNCTION
PRIORITY
REMARKS
1
000 - 255
General dimming 0-
100%
1
2
000 - 255 Red dimming 0-100%
3
000 - 255 Green dimming 0-100%
4
000 - 255 Blue dimming 0-100%
