Monoprice 612720, User Manual

Page: 5 / 8

5
Menu Operation
To illustrate the methods used to manipulate the menu options, we will take as an
example selecting 7-color cycling mode program to execute:
1. Press the MENU button repeatedly until either Au## or So## is displayed.
2. Press the ENTER button to select entry for editing.
3. Use the UP or DOWN buttons to increment or decrement the value until the
display shows Au09 .
4. Press the ENTER button to set the Program. The light will now operate in 7-color
cycling mode.
Master/Slave Operation
Multiple lights can be daisy chained together, with one serving as the master and the
others configured as slaves to perform whatever actions are performed by the master
unit. The master light can be in any mode except DMX mode, while all the slaves must
be set to DMX mode, using the address d001.
Note: If the daisy chain is longer than 60 meters or if it contains 20 or more light fixtures,
a DMX signal amplifier should be used to ensure that all devices get valid
instruction signals.
Note: The last device in any DMX chain must be terminated using a DMX Terminator.
You can purchase a DMX terminator (PID 601600) from Monoprice or you can
make a DMX terminator using a standard XLR male plug (PID 601651) by
soldering a 120 ohm (1/4 watt) resistor between pins 2 and 3.