background image

 

Take care to prevent damage to the power cord. Do not allow it to become 
crimped, pinched, walked on, or become tangled with other cords. Ensure that the 
power cord does not present a tripping hazard. 

 

Never unplug these speakers by pulling on the power cord. Always grasp the 
connector head. 

 

Ensure that power is turned off and disconnected before making any electrical 
connections. 

 

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or 
detergents. For stubborn deposits, moisten the cloth with warm water. 

 

These speakers have no user serviceable parts. Do not attempt to open, service, or 
modify these speakers. 

 

INTRODUCTION 

Thank you for purchasing these 6.5-inch Powered Coaxial Studio Multimedia Monitor 
Speakers from Monoprice! These speakers are professional quality studio monitors, 
designed to produce a flat frequency response for studio recording, mixing, and mastering 
duties. Each speaker is bi-amped, with separate power amplifiers for the low-frequency 
and high-frequency coaxial drivers. They include balanced XLR, balanced/unbalanced 
TRS/TS, and unbalanced RCA inputs. 
 

 

Summary of Contents for 605650










Reviews: