7
Multipoint Connection
A and B LEDs on.
Delete Pairing Record
TX Mode: TX and Charge LEDs flashes
twice.
Low Voltage
Charge LED flashes red.
Charging
Charge LED solid red.
Fully Charged
Charge LED off.
CHARGING
The internal battery should be charged before first use and at least once every two months
to keep the battery fresh and capable of holding a full charge.
1.
When the Charge LED begins to flash red, the battery is low and needs to be
recharged.
2.
If power is on, press and hold the Multifunction Button (MFB) for 2 seconds to turn
the unit off.
3.
Plug one end of the included Micro USB Charging Cable into the Micro USB
Charging Port, then plug the other end into a wall charger, power bank, computer,
or other USB power source (available separately). The Charge LED will illuminate
solid red.
4.
When charging is complete, the Charge LED will turn off.
TRANSMITTER (TX) MODE
Bluetooth® Pairing and Connection
1.
With power off, slide the Operating Mode Switch to the TX position.
2.
Press and hold the Multifunction Button (MFB) for 3 seconds to power the unit on.
