background image

  

INTRODUCTION 

Thank you for purchasing this In-Ceiling Paging Speaker! This speaker features a 
built-in step-down transformer, allowing it to be used as part of a 70V or 100V 
constant voltage speaker array. It includes two 100V taps (6 and 10 watts) and 
two 70V taps (3 and 6 watts). This commercial/industrial paging speaker is ideal 
for vocal announcements and paging with the ability to play light background 
music. 
 

FEATURES 

 

70V/100V constant voltage speaker 

 

Two 100V taps (6 and 10 watts) and two 70V taps (3 and 6 watts) 

 

Narrow edge design with aluminum grille 

 

110 Hz ~ 15 kHz frequency response 

 

Up to 101dB ±3dB sound pressure level 

 

CUSTOMER SERVICE 

The Monoprice Customer Service department is dedicated to ensuring that your 
ordering, purchasing, and delivery experience is second to none. If you have any 
problem with your order, please give us an opportunity to make it right. You can 
contact a Monoprice Customer Service representative through the Live Chat link 
on our website www.monoprice.com or via email at [email protected]
Check the website for support times and links. 
 

 

Summary of Contents for 36379









Reviews: