background image

  

SAFETY WARNINGS AND GUIDELINES 

Please read this entire manual before using this device, paying extra attention to 
these safety warnings and guidelines. Please keep this manual in a safe place for 
future reference. 

 

This speaker is intended for indoor use only. Do not expose this speaker 
to water or moisture of any kind. 

 

Turn off and unplug all equipment prior to making electrical connections, 
including speaker wire connections. 

 

Reduce the volume level prior to making any change to the audio input 
source, e.g., changing radio stations or changing CDs. 

 

When using this speaker as part of a constant voltage speaker system, 
ensure that the amplifier power is at least 20% higher than the total 
power settings of the connected speakers. 

 

Most speaker damage is caused by clipping, which is heard as distortion. 
If you hear distortion, reduce the volume level until the audio is no 
longer distorted. 

 

Take care to ensure that the speaker wire connections are properly 
polarized. Inverted polarization can result in unnatural or attenuated 
sound, especially in the bass frequencies. 

 

Do not use chemical cleaners or solvents to clean this speaker. Use only 
a soft, dry cloth. Moisten the cloth with warm water for particularly 
stubborn deposits. 

 

 

Summary of Contents for 36379









Reviews: