7
POS Comeback: This setting instructs the camera to remember the last position
after the set time has elapsed. This is useful for when the camera is turned back on.
Set the value to 30, 60, or 90 seconds. The change takes effect after exiting the
menu.
Lens Menu
Press the Lens OSD button on the remote control to open the camera menu. Use the
directional buttons to scroll and change the settings. An & symbol on the menu indicates
that the parameter is being adjusted. Press the Lens OSD button again to save the settings
and exit the menu.
BL: Turn backlight compensation On or Off. The change takes effect immediately.
Saturation: Set the color saturation to a value from 0-15. The change takes effect
immediately.
Sharpness: Set the sharpness to a value from 0-15. The change takes effect
immediately.
NR: Set the noise reduction to Off or Auto 1-4. The change takes effect immediately.
WB: Set the white balance to Auto, Indoor, Outdoor, Onepush, ATW, or Manual.
When the Manual option is selected, you can set both the RGAIN (red gain) and
BGAIN (blue gain) to a value from 0-255.
AE: Set the exposure to Auto or Manual. When set to Manual, you can set the
shutter speed to a value from 1/10,000 to 1/60 seconds. The Iris is fixed by default
and is non-adjustable. The change takes effect immediately.
Notes:
Only the high-end models support the OSD menu display
Pan and Tilt operations are disabled when the OSD menu is displayed.
The settings for the Address Code, Protocol, Baud Rate, and Preset Freeze functions
do not change when the Reset button is pressed.
The Shutter can only be adjusted if Manual is selected in the AE menu.
