6
Lenstype: Displays the camera lens type.
Dometype: Displays the camera model information.
Vendor: Displays the manufacturer.
Version: Displays the firmware version.
Dome Menu
Press the Dome OSD button on the remote control to open the camera menu. Use the
directional buttons to scroll and change the settings. An & symbol on the menu indicates
that the parameter is being adjusted. Press the Dome OSD button again to save the
settings and exit the menu.
Protocol: Choose VISCA or Pelco-D as the control protocol. The change takes effect
after exiting the menu.
Baudrate: Choose 9600 or 38400 for the baud rate. The change takes effect after
exiting the menu.
Pan Speed: Set the pan movement speed to a value from 1-24. The change takes
effect after exiting the menu.
Tilt Speed: Set the tilt movement speed to a value from 1-20. The change takes
effect after exiting the menu.
Auto Rev: Set the image flip to On, Off, Mirror, or Flip. The change takes effect
immediately.
Frame: Set the video output frame rate to 25 or 30 frames per second. The change
takes effect immediately.
Flicker: Set the anti-flicker setting to 50Hz or 60Hz. The change takes effect
immediately.
Preset Freeze: When enabled, the camera freezes the image on screen while it
moves to a preset PTZ position. The change takes effect after exiting the menu.
