32
USING THE CAMERA
The MP Voxel 3D Printer features a built-in camera, which allows you to monitor the print.
Camera Mode
The built-in camera is incompatible with the USB port in that only one can be used at a
time. There are two modes that control whether the camera or the USB port is in use: Auto
Mode and Manual Mode.
In Auto Mode, the printer automatically switches between activating the camera or USB
port, depending on what the printer is doing at the time. If it is idle, the camera is off and
the USB port is active, allowing you to transfer files to the printer's built-in memory. While
printing, the USB port is disabled and the camera is available for use. Auto Mode is the
default mode. When in Auto Mode, the OSD menu will display the screen below and to the
left.
In Manual Mode, you can switch between using the camera or USB port at will. To switch,
simply touch the icon of the one you want to use. When in Manual Mode, the OSD menu
will display the screen above and to the right.
