14
5.
Once the driver is installed, the Driver Configuration window will open. Close the
window, then click the Close button on the installer. Restart your Mac®.
HARDWARE INSTALLATION
Important! If you have not already done so, install the driver software by following the
Windows®
or Mac® OS X® installation instructions in the SOFTWARE INSTALLATION section
above.
1.
Carefully remove the monitor, stand, and accessories box from the packaging. Place
a blanket or towel on a flat surface, then place the monitor face down on the
blanket or towel.
2.
Use the four screws to secure the stand to the back of the monitor. You may need
to adjust the position of the stand to access the screw heads.
3.
Place the monitor in its intended location and adjust the angle as desired.
4.
Using the included VGA cable, the included HDMI® cable, or a DVI cable (not
included), plug one end into the VGA, HDMI, or DVI connector on the monitor, then
plug the other end into the appropriate video output on your computer.
5.
Using the included USB cable, plug one end into the USB port on the monitor, then
plug the other end into an available USB port on your computer.
