18
15.
Finally, using the included Micro USB cable, plug one end into the USB port on the
printer, then plug the other end into an available USB port on your computer.
Watch the right hand corner of the screen. A bubble will appear in the lower right
corner of your desktop, which is telling you that Windows is installing the necessary
printer drivers. Click the bubble and verify that the drivers have been properly
installed.
Congratulations, you have installed Cura and connected your PC to your new 3D printer.
Refer to Cura's documentation for operating details and information on the various
options.
Repetier-Host
You can also install Repetier-Host from the file on the included microSD
™
card or from a
download from the internet. The screenshots below show the proper settings to use for
this printer in Repetier-Host.
