10
8.
Press the Seal Button to seal the end of the plastic.
9.
Press the Release Buttons on the sides to release the Locking Levers.
10.
Remove the sealed plastic from the sealing slot. Inspect it to make
sure that the end is properly sealed.
11.
Allow the sealer to cool for 5 minutes before attempting to seal
another bag.
Vacuuming and Sealing a Bag
Perform the following steps to seal and optionally vacuum a premade or
custom-sized vacuum bag.
1.
Plug the sealer into a nearby AC power outlet.
2.
If you are going to seal liquid or moist food, press the Food Button to
toggle Moist mode. The Moist LED should be illuminated.
3.
If you are going to seal delicate or crumbly food, press the Mode
Button to toggle Gentle mode. The Gentle LED should be illuminated.
4.
Place the desired food, liquid, or non-food item(s) into the sealing
bag.
5.
Insert the open end of the sealing bag into the slot between the
Sealing Tray and the Main Body (i.e. the Sealing Slot). Ensure that the
plastic is evenly inserted into the slot.
6.
Press down on the Locking Latches on each side to lock the bag into
the Sealing Slot.
7.
Gently tug on the bag to ensure that it is firmly seated in the slot. If it
moves on either side, press the Release Buttons on each side,
reorient the plastic, then press down on the Locking Latches again to
lock the bag in place. Repeat until the plastic is firmly held within the
Sealing Slot.
8.
Press either the Vacuum Seal Button or Seal Button, depending on
whether you want to remove air from the bag or not.
