10
18.
Plug in and power on all connected equipment. Start video playback on your HDMI®
source device.
19.
Verify that video is visible on the remote display
20.
If you are using the IR extender, verify that you can control the source device from
the remote location or the remote display from the source location.
Congratulations, your HDMI extender is properly installed!
SETTING THE EQ SWITCH
If you see flickering, blinking, or other video anomalies on the remote display, use the EQ
Switches to increase the signal strength. Start with the EQ set to 0, then increase it until
the video anomalies are no longer present. The positions for each of the three DIP switches
for each number value and the approximate HDMI cable length range can be found in the
following table.
EQ Switch Positions
Approximate Cat6 Cable Length
up to 49 feet (15 meters)
49 ~ 98 feet (15 ~ 30 meters)
98 ~ 131 feet (30 ~ 40 meters)
131 ~ 164 feet (40 ~ 50 meters)