13
7.
Place a 5/16" washer (N) onto one of the 5/16" x
3" lag bolts (O), then insert it in one of the
mounting holes and tighten it with a 1/2"
socket wrench. Repeat with the other lag bolts.
Do not over tighten the bolts.
MULTIPLE MOUNT INSTALLATIONS
If you will be installing multiple mounts in a video wall, draw horizontal and vertical lines to
mark the locations for additional mounts, as shown in the following images. A laser level
will make this easier. Once the locations are determined, mount each additional mount
using the instructions in the
MOUNT INSTALLATION section above.
