CHARGING YOUR MOBILE DEVICE
Perform the following steps to charge a mobile device using this Power Bank:
1. Plug one end of the included micro USB charging cable into the charging input
port on your mobile device.
Note: If your device does not use a micro USB connection for charging, use the
cable that came with your device instead.
Plug the other end of the charging cable into the
USB Output
port on the Power Bank. Charging
will begin automatically and the
LED Charge
Indicator
will blink to indicate that it is operating
properly.
Note: When the LED turns off, the Power Bank's
internal battery is depleted. Please cease use
immediately and fully charge it as soon as possible.
2. When your device is fully charged, unplug the charging cable from the Power
Bank, and then from your mobile device. The Power Bank will remain on for
about 15 seconds, and then will automatically turn off.
TROUBLESHOOTING
Q1: The Power Bank won't charge my device and the LED remains off.
A1: The battery is depleted. Please fully recharge the Power Bank and try again.
Q2: Despite being fully charged, the Power Bank won't charge my device.
A2: Double check the cable connections and reseat as necessary. Try using a different
charging cable. Check your device's owner's manual to verify it is compatible with
Power Banks. Try charging a different device to see if it is the Power Bank, cable,
or device that is causing the problem.
Q3: The Power Bank will charge using a wall charger, but won't charge when I plug it
into my computer.
A3: Verify that you are not connecting through a passive USB hub. Try using a different
USB port. Note that some laptop USB ports may have insufficient current to charge
the Power Bank in a timely manner.
6
