![background image](http://html1.mh-extra.com/html/monoprice/13084/13084_user-manual_1828449007.webp)
CHARGING YOUR MOBILE DEVICE
This Power Bank features two USB charging ports, allowing for simultaneous charging
of two devices. The USB1 port is capable of producing up to 1A of charging current,
while the USB2 port produces up to 2A, making it better suited for charging high current
devices, such as tablets.
Perform the following steps to charge a mobile device using this Power Bank:
1. Plug one end of the included micro USB charging cable into the charging input
port on your mobile device.
Note: If your device does not use a micro USB connection for charging, use the
cable that came with your device instead.
2. Plug the other end of the charging cable into one
of the
USB Output
ports on the Power Bank.
Charging will begin automatically and the
LED
Power Level Indicators
will illuminate to show
the current charge level of the Power Bank. As
the Power Bank's charge is consumed, the LEDs
will turn off one by one to indicate the decreased
charge level, as shown in the table below:
LED #
Charge Level
0~5%
6~25%
26~50% 51~75% 76~100%
1
off
on
on
on
on
2
off
off
on
on
on
3
off
off
off
on
on
4
off
off
off
off
on
Note: When all the LEDs are off, the Power Bank's internal battery is depleted.
Please cease use immediately and fully charge it as soon as possible.
3. When your device is fully charged, unplug the charging cable from the Power
Bank, and then from your mobile device. The Power Bank will remain on for
about 7 seconds, and then will automatically turn off. Alternatively, you can turn it
off by pressing and holding the
Power
button for about 2 seconds.
7