To remove the base, perform the following steps:
1. Place a blanket or towel on a flat surface, such as a table or the floor.
2. Place the monitor face down on the blanket or towel.
3. Squeeze the plastic clip on the bottom of the base and pull the base off the stand.
Note that the stand can be removed from the back of the monitor so that the monitor can be
attached to a desk or wall mount. To remove the stand, perform the following steps:
1. Place a blanket or towel on a flat surface, such as a table or the floor.
2. Place the monitor face down on the blanket or towel.
3. Remove the four M4x8screws attaching the stand to the back of the monitor.
4. Follow the mounting instructions for your wall/desk mount to attach the monitor to the
mount.
5. Store the stand and mount screws in a safe place for future use.
Note: The monitor uses a VESA mounting size of 100x100mm.
8
Summary of Contents for 12156
Page 1: ......
