Monoprice 11931 User Manual Download

Page: 5 / 5

OPERATION

To check the current charge level, press the power button.

The LEDs will illuminate to indicate the charge level.

To charge a device, simply plug it into the backup

battery/charger. It will detect the device and will start

charging.

Alternatively, press the power button to turn the backup

battery/charger on and then plug the device you want to

charge into it. The backup battery will power off after 30

seconds if it is not connected to a device for charging.

Press and hold the power button for about 2 seconds to turn

the flashlight on/off.

Note that it is normal for the battery to become warm to the

touch when it is charging another device or is being charged.

Summary of Contents for 11931

Page 1: ...PID 11931 USER S MANUAL BATTERY BACKUP for iPhone iPod and other USB Mobile Devices 15600mAh 2 1A ...

Page 3: ...ut 5 VDC 1 8A Output 1 5VDC 1 0A Output 2 5 VDC 2 1A Charge Cycles 500 Dimensions 3 0 x 0 8 x 5 5 75 x 21 x 140 mm Operating Temperature 32 131 F 0 55 C Protection Over charge over discharge over current and short circuit protection OVERVIEW a Charge level LEDs b Power switch c LED flashlight d Micro USB input e USB output 2 f USB output 1 2 ...

Page 4: ...ger computer port etc For fastest charging use a source that is capable of producing at least 2 0 amps of charging power The nominal charging time using a 2 0A source is about 11 hours During charging the four charge level indicators will show the current charge level Note that the battery should be charged before use 3 ...