7
•
Select: Use the in and out buttons to set the input for any
given output. To make the selection, first press the letter
button (A-H) corresponding to the output you wish to
change, then press the number button (1-8)
corresponding to the input you want to assign to the
selected output. For example, to set the A output to use
the 8 input, press A8 on the remote control.
•
out set: Press the up
▲
button for the desired OUTPUT
(A-H) to increment the selected input by 1, from 1-8 and
then back to 1 again. Press the button repeatedly to cycle
through the available inputs. Press the on/off button for
the desired OUTPUT to turn the output on or off.
RS-232 CONTROL
By connecting the matrix to a PC using an RS-232 cable (available separately), you can control
the matrix using commands issued from a terminal program on your PC. The following table
lists the various commands you can use. Note that the Power switch on the front panel must
be in the ON position for these commands to function, including the power on/off commands.
Command
Function
QS
Queries the status of the matrix and displays the current connection
relationships (A1, D2, C3, etc.).
PON
Turns power ON. Note that the Power switch on the front panel must be
set to the ON position for this command to function properly.
POFF
Turns power OFF.
X#
Selects input # for output X. Substitute an output channel letter (A-H) for
the X and the input channel number (1-8) for the #.
OFFX
Disables video output for the selected output channel. Substitute an
output channel letter (A-H) for the X.
ONX
Enables video output for the selected output channel. Substitute an
output channel letter (A-H) for the X.
