background image

REGULATORY COMPLIANCE 

 

FCC Class B Notice 

Note: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 

 

Consult the dealer or an experienced radio/television technician for help. 

Modifications: Any modifications made to this device that are not approved by 
Monoprice, Inc. may void the authority granted to the user by the FCC to operate 
this equipment. 

 

 

This product is in compliance with CE directives and bears the CE mark. For 
detailed information on specific directives, please contact Monoprice Customer 
Service. 

 

Summary of Contents for 11751









Reviews: