6
PRODUCT OVERVIEW
42564
1.
INPUTS: Eight balanced XLR line inputs for connecting to the preamplifier outputs
on a dedicated preamplifier or AV receiver.
2.
OUTPUTS: Eight pairs of 5-way binding posts for connecting the speakers.
3.
TRIGGER INPUT: 3.5mm TS jack for connection to the trigger output of a source
device. The presence of voltage on this input will cause the amplifier to power on.
The amplifier will automatically power down into standby mode after the trigger
signal has been removed.
4.
GND: Chassis ground. While a grounding wire is rarely needed, occasionally there is
a hum issue when components are interconnected. This can be remedied by tying
their chassis grounds together.
5.
MASTER POWER: The Master Power switch is used to apply or remove power to the
amplifier. By contrast, the Power Switch on the front panel is used to switch the
amplifier between standby mode and full power on.
6.
FUSES: Two fuse holders, each of which contains a 20A slow-blow ceramic 5x20
fuse. The fuse on the left protects channels 1-4, while the one on the right protects
channels 5-8.
7.
AC INPUTS: Two IEC 60320 C20 panel connectors for connecting the included high-
current AC power cords.
