6
Using the Downdraft System
Downdraft Vent System
To use the
downdraft
system
Turn the downdraft blower
ON
by pressing
the raise/lower pad. Place your finger on the
“center” of the pad and hold until you observe
the vent moving, then release. The air vent
will rise.
All models have a remote raise/lower pad.
Use the selector switch to turn the blower
ON,
OFF
or to change the blower speed.
The vent may be lowered by again pressing the
raise/lower pad. The blower, if left on, will
automatically go off when the vent is lowered.
NOTE:
For most convenient operation,
set the blower to the speed you use most often.
The blower will come on to this speed whenever
the unit is raised.
Use the selector switch to turn the blower on or off
or to change the blower speed.
The raise/lower pad location may vary.
Raise/lower pad