Monogram ZIS420N, Installation Instructions Manual, Page: 7 / 24

6 mm FRAMED PANEL DIMENSIONS
7
If you choose to install framed panels, they must
be cut to the dimensions shown. The panels will slide
into the frame on the door and grille.
Non-Dispenser Models
If the custom panel is less than 6 mm thick and it fits
loosely in the door frame it can be backed up with
a piece of filler material or foam tape to improve
the fit.
IMPORTANT NOTE: Maximum total panel weight:
• Fresh food door panel – 34 kg.
• Freezer door panel – 24 kg.
• Grille Panel – 8 kg.
The framed panel must be 6 mm nominal thickness
to fit the dispenser trim.
IMPORTANT NOTE – DISPENSER MODELS
The refrigerator is supplied with two dispenser trims,
one for framed panels and one for overlay panels.
• If the panel is less than 6 mm thick, a noticeable gap
may be created around the dispenser trim. Foam
tape may be applied on the door to improve the fit.
• If the panel is more than 6 mm thick, the dispenser
trim cannot be secured to the door.
See Dispenser Trim Fit Examples, page 9.
Design Guide
244 mm
Dispenser Cutout
391 mm
Fresh Food
Panel
Freezer
Panel
E
D
F
G
A
B
Grille Panel
C
Dispenser
Cutout
Side-by-Side (in millimeters)
A B C D E F G
1013 mm 241 mm 1737 mm 370 mm 624 mm 452 mm 79 mm
1165 mm 241 mm 1737 mm 471 mm 675 mm 452 mm 130 mm
Dispenser
Cutout Position
6 mm
Panel
Door
8 mm
Trim
Reveal
42 ” Models
48 ” Models