Installation Instructions
6
STEP 3 LEVEL
• Use a 1" open-end wrench to turn the leveling legs
and raise or lower the product.
• Adjust carefully, the wine chiller or beverage center
should be level and plumb with cabinetry, and
should align with adjacent toekick height.
STEP 5 SLIDE PRODUCT INTO
THE CUTOUT
• Carefully, slide the wine chiller or beverage center
into the opening. Be careful not to entangle power
cord.
• Make certain that the door protrudes 1" beyond the
surrounding cabinets.
STEP 4 CONNECT POWER
• Connect power cord plug to a properly grounded
receptacle.
• Check to make sure power is on by opening the door
to see if interior light turns on.
STEP 6 INSTALL BADGE
• Follow instructions on the back page for installation
of the Monogram badge.
STEP 7 SET TEMPERATURE
CONTROLS
• The temperature controls are preset. Refer to the
Owner’s Manual for more information. Allow 24
hours for temperature to stabilize.
Turn Right to Lower
Turn Left to Raise
Summary of Contents for ZDWC240NBS
Page 7: ...7 ...