
BY
Internal temperature is the best test of doneness
for many foods.
Use
Cook& Hold to cook a variety of foods
to the desired finished food temperature. The Time
Cook I &II setting is recommended for batters,
doughs, frozen foods and foods which are difficult
to cook precisely with the probe.
Cook& Hold takes the guesswork out of
cooking, because the oven automatically switches
to “Hold” setting after reaching the preset food
temperature and maintains that temperature for up
to one hour or until you touch the
pad,
NOTE: Oven automatically switches to “Hold”
when preset food temperature is reached.
The Temperature Probe
The temperature probe is a food thermometer that
gauges the internal temperature of your food. (Its
appearance may vary from picture at right.) The probe
must be used when using
Cook & Hold or Auto
Roast. To use the probe properly, follow directions in
the Automatic Roasting section.
Cable
End
How to
Cook a Rolled Beef Rib Roast to Medium
Step 1: Insert temperature probe
attach probe
securely in oven wall. Close the door.
Step
2:
Touch
COOK
m
Step 3: Touch 1,6 and O for
Step 4: Touch POWER LEVEL
POWER
pad. Touch 5 for medium power.
LEVEL
Step 5: Touch the START pad. If
START
internal temperature of the roast
is less than
display will
show “COOL”; if temperature is
or above, display shows
temperature counting up.
Step 6: When
is reached, the oven will sound
and display “Hold.” The oven will then hold the
temperature.
Step
7: Touch the
pad to stop the cycle.
Step
8:
Remove probe and food from the oven.
Cooking Tips
●
Use a lower power level; foods
●
Be sure frozen food has been
●
Cover foods loosely for moisture
will heat more evenly though
completely defrosted before
control and quick, even heating.
requiring more time.
inserting probe. Probe may break
off if used in frozen foods.
Questions and Answers
Q. Why did
flash on the display after I
Q. Can I leave my probe in the oven if it’s not
touched the START pad?
inserted in food?
A.
will flash if you don’t seat the cable
A. No, if it touches the oven wall, it may damage
end of the probe securely into the receptacle in
the oven.
the oven
or if you touch the
COOK
& HOLD pad and forget to use the probe.
20