5
Instructions for controller No. 50805
Electric connection: 230V / 50Hz
Max. outlet: 1,800 W (including mother heat mat)
IP45, weight 480 gr.
Temperature: adjustable 25°C – 40°C
Installation: only through an electrician
FI-switch: Installation of this switch is mandatory
Manufacturer: Monoflo Produktions GmbH & Co KG
Installation
The controller must be mounted on a solid and not flammable surface. The enclosed plugs that
avoid the wires from being pulled out need to be fitted into the housing. The holes can be drilled
into the housing accordingly.
The electric installation must be done as shown on the plan, which is found inside of the controller.
The hook-up must be done by an electrician.
The controller can be adjusted starting at 25°C in steps of 1.6°C by pushing the ‘+’ button. Once
you reach 40°C you can push again to get back to Zero.
Damaged controllers may not be used. These instructions must be translated by our dealers into
their respective language.
