Mono OMEGA TOUCH 400, Operating And Maintenance Manual

Page: 8 / 63

FG078 –OMEGA TOUCH LMC 04-11 RAC
8
4.0 SAFETY
1 Never use a machine in a faulty condition and always report any damage.
2 Only trained engineers may remove parts from this machine that requires a tool to
do so.
3 Always ensure hands are dry before touching any electrical appliance (including
cable, switch and plug). NEVER move machinery by pulling on the power cords
or cables.
4 Ensure that the floor area around the OMEGA is clean to avoid slipping –
especially if carrying heavy hopper and template components to and from the
machine.
5 All operatives must be fully trained.
Use of the machine can prove dangerous if:

the machine is operated by untrained or unskilled staff

the machine is not used for its
intended purpose

the machine is not operated correctly
All safety devices applied to the machine during manufacture and the
operating instructions in this manual are required to operate this
machine safely. The owner and the operator are responsible for
operating this machine safely.
6 People undergoing training on the machine must be under direct supervision .
7 Do not operate the machine with any panels or guards removed .
8 No loose clothing or jewellery should be worn while operating the machine.
9 Switch off power at the mains isolator when machine is not in use and before
carrying out any cleaning or maintenance .
Omega
Touch