FG080 –EPSILON colour RevC18 06-12-18
17
9.0 PREPARING FOR OPERATION
1
Select template and nozzles required and fit as section 9a & 9b following.
Check that nothing has been left or fallen in the hopper.
Fill hopper with mix and close hopper guard.
2
Connect power cable to the correct electrical supply.
Make sure stop buttons are in released position (turn clockwise if required).
3
Select an existing program or create a new program through the on-screen menus.
(see section 10 operation)
4
The machine is now ready for operation.
TEMPLATE
HOPPER
REMOVE GUARD TO FILL
HOPPER.
REPLACE CORRECTLY.
(MACHINE WILL NOT OPERATE WITHOUT
THIS GUARD IN POSITION)
SCREEN
STOP BUTTONS
It is recommended that when heavy mixes are used, the inside of the hopper should be
coated with vegetable oil and for lighter mixes such as meringue, dampen with water. The oil
or water will help the mix to settle down the hopper walls and prevent air being sucked in.
EPSILON
NOTE: THIS MACHINE IS FOR USE WITH SOFT DOUGH ONLY
The use of templates and/or accessories not produced or supplied by MONO Equipment
will invalidate the machine’s warranty
Summary of Contents for Epsilon 400
