09/2011
Classic 102.2 • Primo 1200
13
english
9 Technical
data
Cutting type
Strip cut
Cross cut
Shred size (
mm)
1.9
3.9
5.8
4 x 25
Sa fe ty ra ting German
DIN 32757 – 1
3
2
2
3
Cutting ca pa ci ty*
(Sheet) DIN A4
70 g/m
2
80
g/m
2
8 - 9
5 - 7
13-15
10-12
16-18
13-15
6 - 7
3 - 5
Weight
6,3 kg
6,8 kg
Lo ading width
225 mm
Cutting speed
60 mm/s
Voltage
230 V, 50 Hz
Power for the maximum number of sheets
150 W
Operating mode
Brief operation
Operating time
2 min
Idle time
15 min
Dimensions
W x D x H (mm)
365 x 273 x 500
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
-10 °C to +40 °C
max. 90 %, without condensation
max. 2,000 m
Volume of shred. mat. container
25 l
Noise level
(idle running)
60 dB (A)
EC Declaration of Conformity
The manufacturer
HSM GmbH + Co. KG
, Austraße 1 - 9, D-88699 Frickingen hereby declares that the machine,
referred to here as
document shredder
HSM Classic 102.2 / Primo 1200
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 13857:2008
• EN 55014-1:2006
• EN 55014-2:1997 + A1:2001
• EN 61000-3-2:2006
• EN 61000-3-3:2008
• EN 60950-1:2006 +A11:2009
Frickingen, 01.03.2010
Rolf
Gasteier
-
Technical
Director
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.
http://www.monomachines.com/
http://www.monomachines.com/
