background image

I. ABOUT THE WIRELESS WATER ROPE SENSOR

PAGE  1

ALTA WIRELESS WATER ROPE FEATURES

•  Wireless range of 1,200+ feet through 12+ walls *

•  Frequency-Hopping Spread Spectrum (FHSS)

•  Interference immunity

•  Power management for longer battery life **(12+ years on AA batteries)

•  Encrypt-RF

®

 Security (Diffie-Hellman Key Ex AES-128 CBC for sensor 

data messages)

•  Onboard data memory stores up to hundreds of readings per sensor: 

      - 10-minute heartbeats = 3.5 days 

      -  2-hour heartbeats = 42 days

•  Over-the-air updates (future proof)

• 

Free iMonnit basic online wireless sensor monitoring and notification system to 

configure sensors, view data and set alerts via SMS text and email

 

* Actual range may vary depending on environment.

** Battery life is determined by sensor reporting frequency and other variables. Other power options are also 

available.

EXAMPLE APPLICATIONS

•  Data center and server room water monitoring

•  Document retention center monitoring

•  Basement water monitoring

•  Plumbing leak detection

•  Boat bilge monitoring

•  Storage monitoring

Many additional applications.

The ALTA Wireless Water Rope Sensor detects the presence of water anywhere along the 

surface of the rope. Sensor comes with 10 feet of water rope. Additional 10 ft sections are 

available and can be connected up to 100 feet.

•  10 ft lead and 10 ft water detection rope

•  Immediately detects water anywhere along rope
• 

Expandable up to 100 ft of detection rope

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the 

length of the detection rope by using two wires covered with conducting polymer. When 

water or conductive liquid contacts the rope, the sensor will immediately turn on the RF 

radio and transmit the data to the wireless gateway and iMonnit Online Sensor Monitoring 

and Notification System, allowing the user to immediately receive an alert by SMS text, 

email or voice call. The sensor rope dries quickly allowing the sensor to reset for next 

use. Detection rope can be expanded up to 100 feet by simply clicking additional 10 foot 

sections of detection rope together. Additional sections of water detection rope are available 
on the Monnit website.

Summary of Contents for ALTA Wireless Water Rope Sensor



















Reviews: