State
The integer presented here is generated from a single byte of stored data. A byte consists
of 8 bits of data that we read as Boolean (True (1)/False (0)) fields.
Using a temperature sensor as an example.
If the sensor is using factory calibrations the Calibrate Active field is set True (1) so the bit
values are 00010000 and it is represented as 16.
If the sensor is outside the Min or Max threshold, the Aware State is set True (1) so the bit
values are 00000010 and it is represented as 2.
If the customer has calibrated the sensor this field the Calibrate Active field is set False
(0) AND the sensor is operating inside the Min and Max Thresholds, the bits look like
00000000 this is represented as 0.
If the sensor is using factory calibrations and it is outside the threshold the bit values are
00010010 and it is represented as 18 (16 + 2 because both the bit in the 16 value is set
and the bit in the 2 value is set).
Note:
These two are the only bits that typically observed outside of our testing procedures.
PAGE 10
Actions View
Notifications for a single sensor or gateway can be created, deleted, and edited by selecting
the “Actions” tab in the sensor tab bar.
You can toggle the Action Trigger on or off by selecting the switch under Current Action
Triggers.
Actions are essential to the sensor because this is how alerts for the device are set for what
to do in case of an emergency. See the
for instructions on how to create
an action.
