Type 318.xx
2018-12-17
38
7.
Startup
Danger due to rotating components
CAUTION
Damage to persons due to moving
components!
Rotating components can cause injury.
►
Never reach into the area of the
rotating clutch and shafts!
►
Protect the clutch against unintentional
access during operation!
►
Mount a suitable protective cover.
Check for correct assembly of all components before startup of the clutch.
Perform a trial run to test the function of the clutch.
NOTE
A strong development of noise is an
indication of inadequate alignment of the
clutch or subsequent settling of the input or
output.
In this case, stop the trial run
immediately
and check the installation positions,
installation dimension and alignment.
After 3 hours trial running under normal operating conditions, check the screw
connections. Pay attention to the tightening torques (see section "
Technical
Specifications
"). to the specified tightening torques
The clutch can be put into continuous operation after checking for proper function.
ATTENTION
►
Before startup, all screw connections
must be checked for mandatory
tightening torque. The threaded pin for
fixing the flanged hubs must be secured
against loosening. e.g., with Loctite 243
or 262 (medium strength).
